Wire-mesh Holding Unit
A wire-mesh holding unit is one of the least
expensive and easiest units to build. It can be made from galvanized chicken wire
(ungalvanized wire will not last long), welded wire, or hardware cloth. The wire mesh bin
also provides for easy turning of the organic materials. Simply lift the wire, set it to
the side, and use a garden fork or shovel to scoop the organics back into the pile while
harvesting finished compost from the bottom.
Materials
- 10' length of 36" wide 1" galvanized
chicken wire or 10' length of ½" wide hardware cloth.
- hardware cloth
- heavy wire for ties
- three or four 1' tall wooden or metal posts (for
chicken wire bin only)
Tools
- Heavy-duty wire or tin snips
- Pliers
- Hammer (for chicken wire bin only)
- Metal tile (for hardware cloth bin only)
- Work gloves
Construction Procedure Using Chicken Wire
- Fold back 3 to 4" of wire at each end of cut
piece to provide a strong, clean edge that will not poke or snag, and that will be easy to
latch.
- Stand the wire in a circle and set it in place for the
compost pile.
- Cut the heavy wire into lengths for ties. Bind
the ends of the chicken wire together with the wire ties using pliers.
- Space wood or metal posts along the inside of the
chicken wire circle. Holding the posts tightly against the wire, pound them firmly
into the ground to provide support.
Construction Procedure Using Hardware Cloth
- Trim the ends of the hardware cloth so that the wires
are flush with a cross wire to get rid of edges that could poke or scratch hands.
Lightly file each wire along the cut edge to ensure safe handling when opening and closing
the bin.
- Bend the hardware cloth into a circle, and stand it
in place for the compost pile.
- Cut the heavy wire into lengths for ties. Bind
the ends of the hardware cloth together with wire ties using pliers.
 |
